Co掺杂对YBa_2Cu_3O_(7-δ)电阻率与塞贝克系数的影响

用固态反应法制备了YBa2Cu3-xCoxO7-δ(x=0.0,0.1,0.2,0.5)样品,研究了Co掺杂对YBa2Cu3O7-δ高温区的电阻率和塞贝克系数的影响。随着Co含量的增加,样品的电阻率和塞贝克系数逐渐增大,从金属性导电转变为p型半导体导电。x=0.2和0.5样品的电导活化能在500K处发生突变,高温区的活化能大于低温区的活化能。通过塞贝克系数与温度的关系,计算出x=0.2和0.5样品的费米能级分别为0.02和0.12 eV。当温度高于650-700K时,氧脱附显著影响样品的电输运性质,导致电阻率和塞贝克系数随温度增加而增大。     

动态冰浆传热特性的研究

动态冰浆由于具有较强的蓄能和传热能力,日益受到人们的重视。文中建立了动态冰浆传热特性的数理模型,并利用已知的载流溶液和冰晶的物性参数,得到了动态冰浆在水平直管、等热流加热条件下的传热系数,根据计算结果,分析了传热系数随着冰浆浓度的变化的规律和冰浆流速和管径对动态冰浆传热性能的影响。     

有损压缩JPEG在载频条纹图分析中的应用研究

探讨了基于JPEG的有损压缩方法在载频条纹图分析中的应用前景。简介了当今流行的JPEG有损压缩技术和傅里叶变换轮廓术。使用专业软件对傅里叶变换轮廓术中拍摄的载频条纹图进行各种压缩比的压缩,解压后再解调出相位,与未经压缩的原图解调出的相位进行比较。将其相位误差与相位移法解调出的相位误差进行了对比,指出相对于相位移法而言,傅里叶变换轮廓术具有滤波的作用,对其拍摄的载频条纹图,应用JPEG压缩算法是可能的,解调出来的相位误差更小。     

超细颗粒在交变电场中团聚过程的数值模拟

建立了异极性荷电颗粒在交变电场中的团聚系数模型,将其应用到Sectional算法中,模拟电场团聚作用对超细颗粒的脱除效果.比较模拟结果与文献中实验数据后发现,在初始浓度不太高时,模拟结果能较好地与实验结果相吻合,而在初始浓度很高时,两者有较大的差异.文中对造成上述现象的可能原因进行了分析.     

非线性时间序列互信息与Lempel-Ziv复杂度的相关性研究

为探究非线性动力学系统的互信息和复杂度的相关性，用Logistic映射、Lorenz模型和心电RR间期的非线性时间序列作为实验数据，计算多分段延时互信息和多分段Lempel-Ziv复杂度以及它们之间的相关系数.结果表明这些序列的互信息和复杂度呈强负相关，对Logistic方程生成的201个序列的不同段互信息和不同段复杂度之间的相关系数绝对值都大于0.9162，最大达0.9923；对94个心电RR间期序列都大于0.8555，最大达0.9860.研究还发现互信息比复杂度能更敏感地表现出非线性动力系统的特征. 关键词： 相关系数 互信息 Lempel-Ziv 复杂度 心电RR间期     

Effects of process parameters on electrical properties of n-type Bi2Te3 prepared by mechanical alloying and spark plasma sintering

n-Type Bi₂Te₃ thermoelectric materials were prepared by spark plasma sintering (SPS) using mechanically alloyed powders. Seebeck coefficient and electrical conductivity of the resultant materials were measured, with emphasis on the effects of sintering process parameters on the electrical properties. The power factor was improved from 1.5 to 1.6 mW/mK² when the SPS pressure was increased from 20 to 50 MPa at 623 K, and was further increased to 2.1 mW/mK² under 50 MPa by raising the SPS temperature from 623 to 673 K. The maximum power factor was obtained for the sample sintered under optimized SPS process parameters, in which the sintering temperature and the sintering pressure are 673 K and 50 MPa, respectively.     

Radiation output of a spherical homogeneous plasma: Analytical models of computing the spectral brightness of plasma objects with various configurations

Analytical relationships between the photon-emission probability from a surface and the optical thickness along with analytical relationships between the spectral brightness of a homogeneous plasma of spherical geometry are derived with taking into account the radiation absorption. The photon-emission probability and the spectral brightness are also obtained for a plasma of cylindrical geometry and a plasma consisting of spherical layers. The relationships are given in the integral form, while attempts to find them analytically, i.e., to calculate the integrals, failed. However, they can be computed numerically. The formula for spectral brightness is derived for the case of radiation of two flat layers, which differ by the structure, thickness, and thermodynamic and spectral characteristics. The expressions for the spherical and flat layers are compared. The ratio of the dimensions permitted to approximate the flat case by the spherical case is found. The criteria of applicability and accuracy of such approximation have been elaborated. As examples of the application of the expressions derived, the radiation spectra of the aluminum, carbon, copper, and oxygen plasmas were calculated and plotted. __________ Translated from Preprint No. 33 of the P. N. Lebedev Physical Institute, Moscow (2006).     

变系数广义KdV方程新的类孤波解和精确解

用普通KdV方程作变换，构造变系数广义KdV方程的解，获得了变系数广义KdV方程新的Jacobi椭圆函数精确解、类孤波解、三角函数解和Weierstrass椭圆函数解. 关键词： KdV方程 变系数广义KdV方程 类孤波解 精确解     

超薄LiTaO3晶片的键合减薄技术

在制造红外热释电探测器阵列过程中，需要利用超薄钽酸锂(LiTaO₃)晶片作为红外热释电探测器件的敏感层。通常LiTaO₃晶片的厚度远厚于红外热释电探测器件要求的厚度，所以需要采用键合减薄技术对LiTaO₃晶片进行加工处理。键合减薄技术主要包括：苯并环丁烯（BCB）键合、铣磨、抛光、加热剥离、刻蚀BCB。加工后得到面积为10mm×10mm、厚度为25μm的超薄单晶LiTaO₃薄膜，晶片厚度、表面粗糙度和面形精度比较理想。测得了LT晶片减薄后的热释电系数为1.6×10^-4Cm^-2K^-1。得到的单晶LiTaO₃薄膜满足红外热释电探测器敏感层的要求。     

A highly clustered scale-free network evolved by random walking

In present paper, we propose a highly clustered weighted network model that incorporates the addition of a new node with some links, new links between existing nodes and the edge's weight dynamical evolution based on weight-dependent walks at each time step. The analytical approach and numerical simulation show that the system grows into a weighted network with the power-law distributions of strength, weight and degree. The weight-dependent walk length l will not influence the strength distribution, but the clustering coefficient of the network is sensitive to l. Particularly, the clustering coefficient is especially high and almost independent of the network size when l=2.